Training Course Seminar Workshop Provider

OBJECTIVES

Participants will learn about the objectives, benefits and features of a Computerized Maintenance Management System (CMMS). The training discusses CMMS modules and state-of-the-art technologies that are used with a CMMS.

Participants will learn how to develop system specifications for their application as well as how to justify, evaluate, implement, and optimize a CMMS. Whether you operate in a small facility or a large, multi location plant, a Computerized Maintenance Management System (CMMS) will help you run your maintenance program more efficiently and cost effectively.

This CMMS training will help participants to understand the objectives, features and benefits of a CMMS and how this technology can help you to improve maintenance productivity, equipment quality and provide better service to other departments all while reducing your maintenance operations cost.

UPON COMPLETION OF THIS TRAINING PARTICIPANTS WILL RECEIVE THE FOLLOWING KNOWLEDGE

• Understand the Fundamentals of Maintenance Management
• Identify Key Modules of CMMS
• Identify Optional Features of CMMS
• Understand the Objectives, Features, and Benefits of CMMS
• Justify a CMMS
• Develop CMMS System Specifications
• Evaluate and Select a CMMS
• Optimize the use CMMS

OUTLINE

Introduction of Maintenance Management

CMMS Overview

• Basic Modules
• Equipment Data
• Preventive Maintenance
• Work Order System
• Spare Parts Inventory Control
• Requisition / Purchasing
• Maintenance Planning and Scheduling
• Budgeting

How to Justify a CMMS

• Determine Objectives, Features and Benefits of a CMMS for your application
• How to Justify a CMMS
• Document cost estimates

How to Evaluate/Select a CMMS

• What features does a quality CMMS provide
• What is the importance of the selection process
• Learn how to evaluate a CMMS using a comprehensive list of criteria
• Learn how to select the best CMMS for your organization that will work for many years (Using a unique mathematical model)

How to Implement a CMMS

• Do's and don'ts of implementing a CMMS
• How to ensure management commitment
• How to determine scope of project
• Deciding schemes for equipment number, locations etc.
• How to gather/enter data
• Develop a prototype
• Final Implementation
• Follow up/Monitor continuous improvement

WHO SHOULD ATTEND THIS TRAINING?

This course is designed for anyone who is concerned with implementing, optimizing or simply understanding a Computerized Maintenance Management System as a way to improve maintenance efficiencies. This training is a must for anyone who is involved in maintenance, planning, scheduling or operations at facilities or plants, including:

• Plant Engineers
• Operations Managers
• Maintenance Managers & Supervisors
• Engineering Technicians
• Industrial & Manufacturing Engineers
• Maintenance Planners
• Maintenance Schedulers
• Purchasing Managers
• Inventory Related Managers
• Anyone interested in Maintenance Management

Ir. Budhi Harto, MM/ Edo Herdianto

	Jun 28 - Jul 1, 2010
	4 days

	Kartika Chandra Hotel
	Jakarta

Send by email -or- fax to:

PT. FOCUS TRACO INDONESIA
Wisma Pakuan, Jl. Pakuan 12
BOGOR - 16143

	(0251) 2169150, 9399988
	(0251) 7534984
	This e-mail address is being protected from spambots. You need JavaScript enabled to view it

PRE-REQUISITE

The participants should have petroleum basic knowledge for Operator, Senior Operator, Junior Engineer and Engineer

COURSE OUTLINE

Basic Introduction of Formation Damage and Hydrocarbon Well Stimulation

• Damage caused by drilling mud
• Damage caused by production well system
• Damage caused by Well Geometry
• Well damage modeling

Damage Measurement and Quantification System

• Pressure Built Up Test
• Pressure Drawdown Test
• Multirate Test

Rock Mechanics and Reservoir Fluids

• Insitu Stress
• Overburden Stress
• Flow Reign and Fluid Rheology

Acidizing Techniques

• Well Test basic principal
• Fluid flows in porous media
• Well Test types

Acid Chemical Reaction and Reservoir Acid Rocks

• Acid reaction with Carbonate Rocks
• Acid flow to Mineral Surface
• Acid spreading into the rocks

Additives in Acidizing

• Surfactant
• Corrosion Inhibitor
• Iron control
• Alcohol
• Mutual Solvent
• Clay Stabilizer

Reservoir Rocks Mineralogy

• Mineral surface area
• Carbonate Rock
• Moxie Mineral

Well Choosing Techniques for Acidizing

• Evaluation Model
• Transient Pressure Analysis

Acidizing Calculation Examples

Fluid Fracturing and its Additives

• Fluid Fracturing composition
• Basic Fluids choosing
• Other Additives

Proppant

• Proppant types
• Proppant Size Specification
• Fracturing Conductivity

Hydraulic Fracturing Geometric Model

• Pan American Model
• PKN and KGD Model
• Continuum Damage Mechanics Model

Fracturing Pressure Analysis

• Basic Equation
• Pressure during Fracturing

Frac Data

• Formation Break Down
• Step Rate Test
• Shut-In Decline Test

Hydraulic Fracturing Design

• Input Data
• Hydraulic Fracturing Optimization

Hydraulic Fracturing Operation Evaluation

WHO SHOULD ATTEND

• Operator/ Sr. Operator/ Jr. Engineer/ Non Engineer
• Petroleum Engineers, Reservoir Engineers, Production Engineers
• Well Service Engineers
• Everybody or professionals who wants to better understanding and broaden their knowledge from the course subject

DR. Ir. Sudjati Rachmat, DEA

	Jun 1-4, 2010
	4 days

	Papandayan Hotel
	Bandung

Send by email -or- fax to:

PT. FOCUS TRACO INDONESIA
Wisma Pakuan, Jl. Pakuan 12
BOGOR - 16143

	(0251) 2169150, 9399988
	(0251) 7534984
	This e-mail address is being protected from spambots. You need JavaScript enabled to view it

COURSE OUTLINE

1. Shipping Terminology

2. Shipping Cargo Document

3. Kapal dan Muatan

4. Draft Survey

5. Cargo Insurance

6. Kerusakan Muatan dan Claim

7. Terminal Operation and Port Facilities:

• Port Operation
• Sarana yang harus disediakan dipelabuhan
• Penanganan muatan
• Surat-surat muatan
• Pemuatan kapal/stevedoring
• System penyusunan muatan dikapal
• Peralatan bongkar muat.

8. Containerization

REOMMENDED PARTICIPANTS

Pegawai dari perusahaan pelayaran, Pegawai dari perusahaan Survey, Pegawai dari perusahaan yang berhubungan dengan Kegiatan pelayaran

Capt. R.I. Triyanto, M.Mar

	Jun 21-24, 2010
	4 days

	Ibis Slipi Hotel
	Jakarta

Send by email -or- fax to:

PT. FOCUS TRACO INDONESIA
Wisma Pakuan, Jl. Pakuan 12
BOGOR - 16143

	(0251) 2169150, 9399988
	(0251) 7534984
	This e-mail address is being protected from spambots. You need JavaScript enabled to view it

OBJECTIVES

After joining in this course, the Participants will be able and capable to :

• Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
• Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
• Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
• Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

AUDIENCE

• No specified (Operator/Sr. Operator/Engineer or Non Engineer)

COURSES OUTLINE

1. Gas Surface Production Operation and Equipments

• Introduction to Gas Handling and Facilities
• Gas Properties
  • Ideal gas
  • Real Gas
  • Gas Formation Volume Factor
  • Gas Compressibility
  • Gas-Water System
  • Gas-Condensate System
• Gas Reservioir Performance
  • Reservoir Gas Flow
  • Gas Reserves
  • Well Completion Effect
  • Tight Gas Well
  • Gas Well Testing
• Gas Piping System
  • Basic Flow Equation
  • Flow in Wells and Flow in Pipelines
  • Effect of Liquids
  • Use of Pressure Traverse Curve
  • Liquid Removal from Gas Wells
• Gas Compression
  • Type of Compressors
  • Compressor Design
  • Centrifugal Compressor
• Total System Analysis
  • Tubing and Flow Line Effect
  • Separator Pressure Effect
  • Compressor Selection
• Flow Measuring
  • Orifice Metering
  • Metering System Design
  • Other Metering Methods
• Gas Condensate Reservoir
  • Well Testing and Sampling
  • Gas Cycling
• Field Operation Problems
  • Pressure Cumulative Production Plot
  • Hydrate Formation
  • Sour Gas Production
  • Corrosion Control With Inhibitors
  • Sulfur Deposition
• Gas Processing
  • Field treatment of Natural Gas
  • Gas Plant Operation
  • Gas Dehydration
  • Gas Sweetening

2. Oil Surface Production Operation and Equipments

• Oil Well Surface Production Equipment and Operation
  • Oil Well Equipment
  • Oil Well Production Operation
  • Well Automatic Safety Device
• Oil Gathering System. Manifold and Flowline
  • Oil Gath ring System
  • Manifold e System
  • Flowline Sizing and Design
• Crude Oil and Gas Separation
  • Separator and Principle of Separation
  • Design of Separator
  • Oil Dehydration
• Principles of Measurement
  • Introduction to Measurement
  • Crude Oil Measurement
  • Gas Measurement
• Well Test
  • Introduction
  • Responsibility for Test
  • Preparation for Test
  • Types of Well Test
  • Equipment and Procedures
  • Accuracy of Fluid Measurement
  • Problem in Testing
  • Type of Test
• Artificial Lift Method
  • Gas Lift
  • Submersible Pump
  • Succker Rod Pump
• Hydraulic Pump

Dr.Ir. Drs. Herianto, MSc

	Jun 14-17, 2010
	4 days

	Novotel Hotel
	Batam

Send by email -or- fax to:

PT. FOCUS TRACO INDONESIA
Wisma Pakuan, Jl. Pakuan 12
BOGOR - 16143

	(0251) 2169150, 9399988
	(0251) 7534984
	This e-mail address is being protected from spambots. You need JavaScript enabled to view it